Wall-Mounting Your TV: A Step-by-Step Guide for a Seamless Installation

Mounting a TV on the wall can make a big difference in the look and feel of your living room. Not only does it provide a clean and modern aesthetic, but it also frees up valuable floor space. However, the process of wall-mounting your TV can be daunting, especially if you've never done it before. In this guide, we'll walk you through the step-by-step process of wall-mounting your TV for a seamless installation.

Section 1: Choose the Right Wall-Mount

Before you can begin the installation process, you need to choose the right wall-mount for your TV. Wall-mounts come in a variety of types, including fixed, tilting, and full-motion. Fixed mounts are the simplest and most affordable, but they don't offer any flexibility in terms of adjusting the angle of the TV. Tilting mounts allow you to angle the TV up or down, while full-motion mounts provide the most flexibility, allowing you to adjust the angle and position of the TV in any direction. Consider the size of your TV and the layout of your room when choosing the right wall-mount.

Section 2: Find the Right Location

Once you've chosen the right wall-mount, you need to find the right location to mount it. Look for a stud in the wall to ensure that your TV will be mounted securely. Use a stud finder to locate the stud and mark its location with a pencil. You can also use a level to ensure that the mount is straight.

Section 3: Install the Wall-Mount

Now that you've chosen the right wall-mount and found the right location, it's time to install the mount. Use a drill to create pilot holes in the wall where you marked the location of the stud. Then, use the screws provided with the wall-mount to attach it to the wall. Make sure the mount is level and securely attached to the wall.

Section 4: Attach the Bracket to the TV

With the wall-mount securely installed, it's time to attach the bracket to the back of the TV. Most TVs come with a VESA pattern, which is a set of standardized mounting holes on the back of the TV. The bracket should match the VESA pattern of your TV. Use the screws provided with the bracket to attach it to the back of the TV.

Section 5: Hang the TV on the Wall-Mount

With the wall-mount and bracket securely installed, it's time to hang the TV on the mount. Carefully lift the TV and align the bracket with the wall-mount. Once the bracket is aligned, slide it into the wall-mount until it clicks into place. Double-check to make sure the TV is securely mounted on the wall.

Section 6: Conceal the Cables

Finally, to give your wall-mounted TV a seamless look, you'll want to conceal the cables. There are a few ways to do this, including running the cables through the wall or using a cable cover to hide the cables. If you choose to run the cables through the wall, be sure to use a cable plate to cover the hole in the wall and protect the cables.

Visit a Showroom

If you're still not sure about which wall-mount or TV to choose, consider visiting HDTV and PC Outlet showroom in Murrieta, CA. Our friendly and knowledgeable staff can help you find the perfect TV for your needs and budget.


Wall-mounting your TV can seem intimidating, but with the right tools and know-how, it can be a relatively simple process. Follow the steps in this guide, and you'll have a seamlessly installed wall-mounted TV in no time.

Back to blog